Installing Windows 10 on a Dell 755 can be a challenging task if you don’t know the right BIOS settings. To make this process easier, this guide will walk you through the steps necessary to change the BIOS settings on your Dell 755 to install Windows 10.
What Is BIOS And What Does It Do?
BIOS stands for Basic Input/Output System. It is a type of firmware that is used to start up your computer. It is responsible for providing basic instructions for your computer’s hardware and software to interact with each other. The BIOS settings control the boot order of your computer, the amount of memory used, and other important settings. When installing Windows 10 on your Dell 755, it’s important to make sure you have the correct BIOS settings.
How To Access BIOS On Dell 755
The first step in changing the BIOS settings on your Dell 755 is to access the BIOS. To do this, turn on your computer, and as soon as the Dell logo appears on the screen, press the F2 key on your keyboard. This will take you to the BIOS setup screen. If you don’t press the F2 key quickly enough, your computer will continue to boot into Windows and you will have to restart the process. Once you have accessed the BIOS, you can start changing the settings.
BIOS Settings To Change For Installing Windows 10 On Dell 755
Once you have accessed the BIOS, you will be presented with a list of settings. The settings that need to be changed for installing Windows 10 on your Dell 755 are as follows:
- Boot Order: Set the boot order to CD/DVD first, followed by the hard drive.
- Boot Mode: Set to Legacy.
- Secure Boot: Set to Disabled.
- UEFI Boot: Set to Enabled.
- System Configuration: Set to SATA.
- Secure Boot: Set to Disabled.
- Integrated NIC: Set to Enabled.
Once you have changed these settings, you can save and exit the BIOS setup. Your computer will then restart and you will be ready to install Windows 10.
Installing Windows 10 On Dell 755
Once you have changed the BIOS settings, you can start the process of installing Windows 10. To do this, insert the Windows 10 installation disc into your computer’s CD/DVD drive and restart the computer. When the Dell logo appears on the screen, press the F12 key on your keyboard to access the boot menu. From the boot menu, select the CD/DVD drive and press Enter. This will start the Windows 10 installation process.
Follow the instructions on the screen to complete the installation. When you reach the point where you are asked to choose the hard drive, select the partition that you want to install Windows 10 on. This will complete the installation and you will have successfully installed Windows 10 on your Dell 755.
Conclusion
Installing Windows 10 on a Dell 755 can be a tricky process, but with the right BIOS settings, it can be done with ease. This guide showed you how to access the BIOS on your Dell 755 and change the settings necessary for installing Windows 10. After making the changes, you can then start the Windows 10 installation process and you will be up and running in no time.